Professional calibration for millimeter-wave radar, LiDAR, surround-view cameras and post-replacement sensors. Every job follows OEM technical specifications, verified step by step, and delivered with a fully traceable calibration report. Alongside calibration we run an EV repair and all-brand diagnostics workshop with a European-car specialty.
One workshop, every service your shop or customer needs — calibration, diagnostics, wheel alignment, vehicle inspection and EV battery diagnostics — each executed to OEM specification and delivered with documented results.
Front and rear mmWave radar alignment for horizontal, vertical and height angles, using OEM-specific targets and procedures to restore ACC and AEB detection accuracy.
ACC / AEBMounting position and coordinate alignment for LiDAR sensors, matching the point cloud to the vehicle coordinate frame for reliable perception and automated parking.
LiDAR / Auto ParkCalibration of forward cameras and 360° surround-view systems, aligning lane-keeping, surround-view stitching and transparent-chassis display to the physical environment.
Lane Keep / 360Dynamic calibration and verification after windshield replacement, collision repair or sensor reinstallation, restoring OEM function and clearing lingering fault codes.
Windshield / CollisionPrecise toe, camber and caster adjustment using modern alignment equipment, setting the suspension geometry OEM procedures require — and the correct foundation for any sensor calibration.
Toe / Camber / CasterFull-vehicle fault diagnosis across all makes and models using factory-level diagnostic computers and live data — from a check-engine light to complex electrical and module issues.
All Makes & ModelsMulti-point mechanical and safety inspection covering brakes, suspension, fluids and electrical systems, with a written report before any work is approved.
Safety CheckBuilt for B2B partners. Send us the vehicle — we handle module programming, sensor calibration and verification end to end, so every job comes back complete, documented and road-ready.
Factory-level online programming for engine, ABS, airbag, radar and camera modules, including replacement-module initialization and software updates to the current level.
B2BSAS zero-point reset and calibration after wheel alignment, suspension work or module replacement — a prerequisite for many ADAS and stability systems.
Coding and configuration of replacement modules — BCM, gateway, ADAS ECUs — to the vehicle's build specification, with retrofit support where the platform allows.
Registration and coding after battery replacement on vehicles that require it — BMW, Mercedes-Benz, VW Group and others — keeping charging and stop-start logic correct.
Radar, camera and LiDAR calibration to OEM procedures in our controlled environment, completed in the same visit as programming.
OEMPost-programming system scan, function verification and a line-by-line report, giving you a documented result to hand over or file.
Our EV division covers the full electric-vehicle service chain — high-voltage repair, battery health, charging systems and thermal management — performed with certified HV safety and OEM procedures.
High-voltage service on traction batteries, drive motors, inverters, onboard chargers and HV distribution — with insulation checks, HV interlock handling and lockout/tagout before work begins.
EVFull battery assessment — state of health, capacity, internal resistance, cell voltage spread, balancing and insulation resistance — delivered with a written battery condition report.
Charging fault finding for AC and DC charging, CCS inlet, onboard charger, BMS communication and charge-curve behaviour — plus charging-related software updates.
Certified HV working procedures — insulation testing, HVIL interlock verification, high-voltage shutdown and isolation, and lockout/tagout before any work on the vehicle.
HV SafeEV cooling-circuit and thermal-system diagnosis — coolant loops, heat pumps, liquid-cooled battery plates and heater faults that affect charging speed, range and battery life.
Every EV repair follows the manufacturer's published procedures — torque values, measurement points, test routines and acceptance criteria straight from the factory manual.
Full-vehicle fault diagnosis for every brand we service — petrol and electric — with a dedicated European-car specialty and manufacturer-level diagnostic computers.
BMW, Mercedes-Benz, Audi, Volkswagen Group, Porsche, Volvo and MINI serviced with platform-specific tools, factory data and the software their systems require.
EuroOEM-level full-system scans across European, Japanese, Korean, North-American and Chinese makes and EVs — DTC-based diagnosis, live data and symptom-driven troubleshooting.
Engine fault finding for combustion vehicles — misfire, air/fuel, ignition, turbocharger, EGR, fuel system and emissions diagnosis with live data and waveform analysis.
ICEManufacturer-level diagnostic systems matched by VIN — guided fault finding, module identification, coding and online programming at factory level.
CAN, LIN and FlexRay network analysis, power and ground testing, voltage-drop, parasitic-drain and short-circuit tracing across all control modules.
Control-module repair, replacement, coding and initialization — including immobilizer and key services where the platform allows.
ModulesEvery vehicle moves through a documented diagnostic workflow aligned to the manufacturer's repair and calibration standards — nothing is left to guesswork.
Level the vehicle on an approved work surface and confirm factory ride height; set tire pressures to specification; inspect for body or suspension damage that could skew measurements.
Perform a manufacturer-level scan across all control modules (ABS, steering angle sensor, airbag, ADAS ECUs), documenting current and stored DTCs, sensor status and live data before work begins.
Identify the required calibration type — static (target) or dynamic (road) — from the manufacturer's procedure, based on VIN, model year and fitted equipment, and load the matching scan-tool application.
Record baseline alignment, ride height and sensor mounting, and capture before-state data so that every change during the job remains visible and traceable.
Position OEM-specification targets at the manufacturer's measured distances and heights, keep the vehicle level, and run calibration until the system reports an accepted status.
Confirm the learned/calibrated status, complete the required drive cycle or road test, re-scan for DTCs, and verify ADAS readiness (ACC, AEB, lane keeping, auto park) before handover.
Diagnostic scope: Inspection, scanning and calibration are performed in line with the vehicle manufacturer's diagnostic and repair standards. Where a repair fault is identified, we recommend correction prior to calibration so the sensor can be set on a sound, undamaged vehicle. Final approval of the calibration result follows the scan tool's accepted status and a completed verification drive.
Real jobs from the shop floor — ADAS calibration, all-brand diagnostics and European-vehicle service in action.
Fixed-rate calibration services with no hidden fees. The final rate is confirmed at intake based on the vehicle and procedure.
| Service | What's included | Rate (CAD) |
|---|---|---|
| Front Windshield Camera Calibration | Windshield-mounted forward camera, OEM target procedure, system self-check. Depending on brand/model. | from $390 |
| Millimeter-Wave Radar Calibration | Front/rear radar, horizontal, vertical and height alignment, verification scan. Depending on brand/model. | from $390 |
| LiDAR Calibration | Mounting position and coordinate alignment, point-cloud verification. Depending on brand/model. | from $550 |
| Surround-View / 360° Camera Calibration | Multi-camera stitching and transparent-chassis alignment. Depending on brand/model. | from $390 |
| Post-Replacement Dynamic Calibration | After windshield, collision or sensor replacement; includes verification drive. Depending on brand/model. | from $390 |
| Module Programming & Coding | ECU/module programming and coding to OEM specification, including replacement-module initialization. Depending on brand/model. | from $250 |
| EV Battery Health Scan | Full battery scan report — state of health, capacity, cell balance scan. | from $150 |
Calibration is only as good as the environment and equipment it is performed with.
Submit your details to book a service — we will confirm with you during business hours.